documentation
VisionLib deeply integrates support for external SLAM on mobile devices (ARKit 1.5 features and experimental features of ARKit 2.0 on iOS, ARCore features on Android). If you want to take advantage of external SLAM you can do this by simply enabling extendibleTracking in your parameters. If your device supports ARKit (ships an A9 or higher processor) or ARCore (find a list of supported devices here) it will automatically use the SLAM prediction of the device.
It is absolutely necessary that the metric of your model fits the real object, since the external SLAM will locate the camera in real world units. Therefore, the units MUST be set right (see also Understanding Tracking Parameters).
Note: If you use VisionLib with external SLAM in Unity, please do not additionally include features from the ARKit or ARCore package. This can lead to significant performance drops.
If you set disableExternalSLAM to true (false by default), you can disable the use of the external SLAM and switch to VisionLib's internal SLAM (which is not recommended in all cases).
If you have a static object, which does not move while tracking, you should enable the staticScene parameter. This stabilizes the pose in case the camera is not moved within a certain distance. The distance can be configured using the keyFrameDistance parameter in mm or by overwriting the _staticScenePrefExtPoseDistance, if you want to control the behavior separately.
Please refer to Configuration File Reference for setting the resolution. You might add this section to your tracking configuration in order to do so:
If you experience problems due to high resolutions, please set the resolution directly to widthxheight (e.g. "1280x720"). It will be chosen, if available, otherwise the first offered resolution of the device will be taken.
If ARKit 2.0, if available the VisionLib will allow you saving the WorldMap additionally to your init data (see Initialization: Fast Init & Re-initialization). Enable this feature by adding useExternalSLAMMap:true to your parameters. It is very useful, if the target object is not being moved (also you may set staticScene:true). This allows very reliable relocalization after an ARKit map has been built. It can be saved, cleared and reloaded using the initData commands.
You can observe 2 additionally saved init data files named: filename.binz.arkitwd and filename.binz.arkitwd.relPose. The state of the world data acquisition state is also reflected in the tracking states as _WorldMappingStatus. It can have the following values, following the Apple Developer docs:
| Tracking States WorldMappingStatus | Apple Name | Description |
|---|---|---|
| N/A | ARWorldMappingStatusNotAvailable | No world map available. |
| Limited | ARWorldMappingStatusLimited | The world tracking has not been mapped sufficiently around the current device. |
| LimitedDetected | ARWorldMappingStatusLimited & Tracking Valid | The world tracking has not been mapped sufficiently around the current device but a pose corresponding to the VisionLib anchors have been found. |
| Extending | ARWorldMappingStatusExtending | Visited areas have already been mapped but mapping is still going on. |
| Mapped | ARWorldMappingStatusMapped | The world has been adequately mapped the visible areas. |
If you are working with a saved map, you can recognize a valid recognized pose already when you switch to the WorldMappingStatus LimitedDetected.
It is useful enabling the plane detection, when using ARKit for creating automatic plane anchors. You can enable those using: externalSLAMPlaneDetect: 0 = no plane detection (default), 1=detect horizontal planes, 2 = detect vertical planes, 3 = detect both
Enable the externalSLAMDraw parameter in order to see the recognized feature points and line boundaries of all the plane anchors.